Supine Stander

supine standerThe Prospect Designs Supine Stander is a versatile, easy to adjust option for children who need supported upright weight bearing and for whom prone standing is not appropriate. The child is always positioned at the lowest possible height regardless of their size and the stander “grows” up with the child. The wide range of angle adjustment allows the stander to be positioned nearly horizontal while placing the child in the stander. The stander can then be easily raised to the desired angle for the child to bear weight.

Basic Stander Includes:

  • Two pair of lateral supports for the trunk and hips
  • One 2 inch velcro strap for either hip or trunk laterals
  • Sectional back pads
  • Posterior knee pads with padded strap
  • Shoe holders
  • Locking casters

Specifications — Supine Stander

(SS1) (SS2)
Footrest to top of supine back *(see Measurements below) 27” to 36” 35” to 45”
Range of recline angle in degrees 90 to 5 90 to 25
Width between laterals 6½” to 11” 8″ to 13″
Width of main supine board 15” 17”
Base-width times length (fully extended) 24” X 36” 27” X 36”

Measuring Guide

Child's Measurements Standing (in inches):

Standing Measurements

*Key Measurement — Should correspond to specification footrest to top of main supine board.

A Knee height (floor to mid knee)

B Hip height (floor to top of hip)

C Elbow height (floor to bent elbow)

D Axilla height (floor to armpit)

E* Shoulder height (floor to top of shoulder)

F Overall height (floor to top of head)

G Hip width (widest location)

H Trunk width (widest location)

Order/Price Quote Request Form

Please select products and accessories then click the Submit Price Quote Request button

Select Size: (required)

sizes available for supine stander

Choose Your Accessories

Select the needed accessories and options from the following list:

Headrest and Headrest Mounting options (Choose one)

CH-AH Contoured headrestCH-AH Contoured headrest pad with adjustable height provides consistent symmetrical support. Adjustable height mount allows headrest to be moved up or down in relation to the back.
 CH-AH – $100


CH-ADH Contoured headrestCH-ADH - Contoured headrest pad with adjustable height and depth. Adjustable height and depth mount adjusts for height as well as anterior/posterior.
 CH-ADH - $170


FH-AH - Flat headrestFH-AH - Flat headrest - The Flat head rest pad is used when no lateral support is required. Adjustable height.
 FH-AH - $60


FH-ADH - Flat headrestFH-ADH - Flat headrest - Adjustable height and depth mount adjusts for height as well as anterior/posterior.
 FH-ADH - $110


FHL-AH - Flat headrest with adjustable lateralsFHL-AH - Flat headrest with adjustable laterals - Flat head rest pad with adjustable lateral supports allows for more specific placement of the supports for height and width.
 FHL-AH - $140


FHL-ADH - Flat headrest with adjustable lateralsFHL-ADH - Flat headrest with adjustable laterals - Adjustable height and depth mount adjusts for height as well as anterior/posterior.
 FHL-ADH - $200


LKS - Lateral Knee SupportsLKS - Lateral Knee Supports
 LKS - $100


Standard chest harness CHS, CHS2Standard chest harness CHS, CHS2 - Four point bib style harness. Secured with 2 fastex buckles on 1” webbing for trunk and 2 velcro straps over the shoulders. Two sizes correspond to the two sizes of stander.
 CHS - $110 CHS2 - $110


Shoulder Protraction Pads SHPRS and SHPRLShoulder Protraction Pads SHPRS and SHPRL - 45° support pads mounted in the same slots as the standard lateral pads help to block unwanted upper extremity extension or to keep arms more mid-line for children with low tone. SHPRS (Small) for the TS13, SHPRL (large) for the TS15 and TS17.
 SHPRS - $100 SHPRL - $100


Adjustable ArmrestsAdjustable Armrests AR - Adjustable armrests can be added to the basic tilt in space chair. They are angle adjustable and may be flipped back completely out of the way. They are height adjustable by removing bolts and repositioning them in a series of holes on the sides of the chair.
 AR - $110


Slide On Tray TRSSlide On Tray TRS - The tray slides onto the adjustable armrests and is secured with two spring pins that engage in a series of holes on the armrests.
 TRS - $200


Clip On Tray TRCClip On Tray TRC - Attaches to the chair with two spring clips that engage in a series of holes on the sides of the chair. The height is determined by the choice of holes. The angle is adjusted by supports attached to the tray.
 TRC - $250


Please enter your contact information

Your name (required)

Your email (required)

Company/Organization

Telephone

Indicate your upholstery color choice if desired

Message

Verification captcha